Emulsion Chopped Strand Mats for Hand Lay-up Process


Description:

Emulsion Chopped Strand Mats are made of randomly distributed chopped strands held together by an emulsion binder. They are compatible with UP and VE resins. The roll width ranges from 200mm to 3120mm. Special requirements may be available upon request.

Enquiry Now

Hand Lay-up Process:

The reinforcement, in form of fiberglass strands, mats, or woven roving, is first laid into a mold that has been coated with a release agent and a gel coat. Then a resin mix is applied by hand using a brush or spray gun. A roller is then used to ensure uniform impregnation, complete glass wet-out, and removal of any trapped air bubbles. This operation is repeated until the desired thickness of the structure is obtained. After curing at room temperature or under heating conditions, the finished parts are formed.

Product code Area Weight(g/㎡) Typical Width(mm) Resin Compatibility Product Features
E01 225, 300, 450, 600, 900 1040,1270 UP, VE High tensile strength, suitable for products with large production area, no flying during operation, good resin impregnation, fast infiltration speed, easy removal of air bubbles, the high mechanical strength of products, and excellent acid corrosion resistance.
E10 225, 300, 450, 600, 900 1040,1270 UP, VE Good foam deflation by rolling, low resin content
E20 225, 300, 450, 600, 900 1040,1270 UP, VE Good film coating, good resin penetration, fast penetration, easy removal of air bubbles, low resin consumption, the high mechanical strength of the product, and excellent acid corrosion resistance.

The end-use market for hand lay-up process
(Marine / Building and Construction / Automotive / Chemistry and Chemical / Electrical and Electronics / Sports and Leisure / Wind Energy)

Certificates:

Certification Product Code Certificate No
Det Norske Veritas (DNV) EMC300 TAK0000lTJ
EMC450
EMC600
EMC900
Lloyd’s Register (LR) EMC225(E) MAST /3490/2
EMC300(E)
EMC450(E)
EMC600(E)
EMC300(P) LR2002414LP
EMC450(P)
EMC600(P)
EMC900(P)

Contact Us